Address: Wuchang District, Wuhan City, Hubei Province, especially the 1st white sandbar  Tel:027-68888412  Fax:027-88113825
Copyright © 2018 Powerchina wuhan heavy equipment co.,ltd. All Rights Reserved   ICP: 06015111    Powered by 300.cn

Powerchina

No content information display available
Please add data record on website background.

Total Revenue (%)
48.25%
34.50%
12.53%
4.72%

Main Markets          
Western Europe
Eastern Asia
Oceania
Africa

TRADE CAPACITY

No content information display available
Please add data record on website background.
No content information display available
Please add data record on website background.

NEWS

COUNSELING HOTLINE

ADDRESS

Wuchang District, Wuhan City, Hubei Province, especially the 1st white sandbar 

>
News_xx

What are the preparations for Screw ship unloader before use?

Classification:
Industry News
Author:
Source:
Page view

Compared with the head-grabbing machine, Screw ship unloader's salient features are summarized by two guarantees. One is to ensure that the cargo is not polluted by the environment, and the other is that the cargo does not pollute the environment. Other features are continuous material processing, high equipment automation, small work area, and environmental protection.
1. Before boarding the Screw ship unloader, check the walking track and moving range of the Screw ship unloader for operators and obstacles; check whether the anchoring device, anti-climbing iron wedge, wind-proof cable and wheel clamp are complete, If it is intact, the anchoring device, wind-proof cable, and anti-climbing iron wedge should be removed to make it in a non-anchored state.


2. For boarding of the transfer shift, the Screw ship unloader should be checked and confirmed along the boarding route. Check whether the main cable is twisted, injured, or loose at the fixed location; check whether the funnel system is intact; check the condition of the grab connector and the wear of the grab wire rope, and report any abnormalities in time.
3. Check whether the wire rope and wire rope joints are normal; if there is looseness, tighten it.
4. Check the front and rear girders of the Screw ship unloader to confirm whether there are obstacles in the main trolley, the rope trolley track and the moving range, and whether there is any abnormality in the trolley track.

NEWS

LEAVING A MESSAGE

Introduction to the technical index knowledge of customized Bridge grab ship unloader!
Abstract:
The unloading capacity of the customized Bridge grab ship unloader is one of the important technical indicators of the equipment. It will have a great influence on the parameter selection and design of the equipment.
Do you know the components of the customized Bridge grab ship unloader?
Abstract:
The customized Bridge grab ship unloader is a ship unloader device for grabbing materials.
Introduction of customized C-type rotor dumper: Knowledge about the working principle of the dump truck!
Abstract:
A dump truck is a special type of vehicle for short-distance transportation of materials with a tipping hopper. A "bucket"-shaped container is installed on the body, which can be turned over to facilitate unloading. It is suitable for short-distance transportation of various bulk materials such as sand, earth, coal, ore, etc. It has strong power and usually has a mechanical back bucket function.
Page up
1
2
...
15